|
|
Build Your Online Product Catalogs?
| Product Name: |
Metic LYC joint bearing GE140E
|
| Supply Ability: |
5000000 |
| Related proudcts |
metric bearing, |
| Specifications |
140x210x90mm |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
10 |
| Unit Price: |
11.58 |
|
Metic LYC joint bearing GE140E
Brif introductions of LYC joint bearing GE140E
Joint bearing is a special structure of sliding bearing. It has the advantages of simple structure than the rolling bearing, which is mainly composed of an outer spherical surface of the inner ring and the outer ring has an inner spherical form, able to withstand greater load, according to the different type and structure, can bear radial load, axial load and radial, axial and the existence of joint load.
Ball joints are the pivot between the wheels and the suspension of an automobile. Ball joints play a critical role in the safe operation of an automobile's steering and suspension. Ball joints can also be found in most linkage systems for motion control applications, and should not be confused with spherical rod end bearings, which are a different design.
Sealed ball joints do not require lubrication as they are "lubed for life" but standard ball joints must be lubed from time to time. It's best to inspect standard ball joints once a year. Generally speaking, standard ball joints will outlive sealed ones because eventually the seal will break, causing the joint to dry out and rust. While there is no exact life***n that can be put on a sealed ball joint, they can fail as early as 80,000 miles. Signs of a failing ball joint start with a clicking or snapping sound when the wheel is turned and eventually turns into a squeaking sound at the end of a stop, when the gas pedal is used and/or also when hitting bumps. Another symptom could be 'thud' noises coming from front suspension when going over bumps.
1.Open type bearing should be cleaned before mounting.
2.The bearing should bear the force evenly during mounting. Don¡¯t use hard tools strike the bearing directly. If need heating mounting, it should heat the bearing evenly up to 80℃~100℃, then mounting it immediately.
3.The warehouse of bearing should be clean and dry, and the relative humidity should not over 60%
4.The stoc |
| Company: |
jinan kelunte bearing Co.,Ltd
|
| Contact: |
Mr. danny zhou |
| Address: |
No. 223, Office, 2/F, Inside Yard 158, Jiluo Road, Tianqiao District, Jinan,Shandong, China (Mainland) |
| Postcode: |
250031 |
| Tel: |
0531-55509796 |
| Fax: |
0531-68803368 |
| E-mail: |
|
|
|
|
Home
